Sunningdale Cove: Florida House Plan
Listed on HomePlanHQ. We curate house plans from licensed designers and link directly to the seller. HomePlanHQ never marks up the plan price.
First floor 3,165 sq ft. Second floor 627 sq ft.
About Sunningdale Cove: Florida House Plan
The Sunningdale Cove plan is a two-story Florida design by the Sater Design Collection, laid out with 3,792 square feet of living space, four bedrooms, three full baths and a half bath. The footprint measures 80 feet wide by 96 feet deep and includes a three-car side-entry garage. Features Sater lists for this plan include a study or home office, a walk-in pantry, his and hers closets, a separate guest suite and a fireplace. Sater notes a building restriction on this plan: not available in Lee or Collier Counties FL.
What this plan is built from
Area
- House area
- 3,792 sq ft
- Garage area
- 777 sq ft
- 1st floor
- 3,165 sq ft
- 2nd floor
- 627 sq ft
Foundation
- Type
- Stem Wall Slab
Dimensions
- Width × Depth
- 80' × 96'
- Height
- 32'
- Stories
- 2
Walls
- Framing
- Wood 2x6
Roof
- Primary pitch
- 7/12
The complete construction drawing set
Sater sells each plan as an electronic PDF set or as AutoCAD files, which also include the PDFs. The PDF is printable but not editable; CAD is the format to choose if your builder or drafter will make changes. Both are delivered by email. Below is what a set contains, per Sater.
- Cover Sheet, Index and Site Plan
- Wall Sections and Notes
- Typical Details and Notes
- Foundation Layout Plan
- Detailed Floor Plans
- Reflected Ceiling Plan
- Floor Framing Plan (basement, crawl space and upper floors)
- Roof Layout
- Exterior Elevations
- Building Sections and Details
- Interior Elevations
- Electrical Plan
Sater draws its plans to be consistent with the International Residential Code in effect when each plan was created, but does not warrant code conformity; changes may be needed for your jurisdiction. Plans are not stamped, so if your building department requires a stamp, a locally licensed engineer will need to review the set. Heating, air conditioning and plumbing layouts are not included.
Want changes? Sater quotes them.
If Sunningdale Cove is close but not quite right, Sater's own design team handles modifications. You request them through Sater's Modification Consultation form; HomePlanHQ does not modify plans.
A written proposal first
Fill out the form and pay a $75 consultation fee. Sater replies with a proposal covering the cost and time for your changes.
Fee credited if you proceed
If you accept the proposal, the $75 is deducted from the modification cost. You then buy the plan and pay the agreed modification price.
Billed hourly
Sater bills modifications by the hour, at a higher rate for work that needs redesign by Dan Sater II. Current rates and timelines are on the form page.
