Home · All Plans · Cottage · Walker Way: Cottage Plan, 2,689 sq ft
Exterior
Exterior
Sater Design Collection

Walker Way: Cottage Plan, 2,689 sq ft

$1,425 - $2,420
PDF set to CAD set
Cottage
2689
3
2.5
60' × 44'
2-car, under load
3
+ Modifications through Sater. + PDF sets, CAD on most plans. + PDF usually emailed the same business day.

Listed on HomePlanHQ. We curate house plans from licensed designers and link directly to the seller. HomePlanHQ never marks up the plan price.

Plans & drawings
Walker Way: Cottage Plan, 2,689 sq ft floor plan
Main floor plan
Upper floor plan
Lower level plan

First floor 1,762 sq ft. Second floor 927 sq ft.

Plan description

About Walker Way: Cottage Plan, 2,689 sq ft

Walker Way is a three-story Cottage plan from the Sater Design Collection with 2,689 square feet of living space, three bedrooms, two full baths and a half bath. The footprint measures 60 feet wide by 44 feet 6 inches deep and includes a two-car drive-under garage. Among the features Sater lists are a great room, a study or home office, the primary suite upstairs, a fireplace and a morning kitchen. The plan is drawn on an island basement foundation.

Specifications

What this plan is built from

Area

House area
2,689 sq ft
Garage area
1,111 sq ft
1st floor
1,762 sq ft
2nd floor
927 sq ft

Foundation

Type
Island Basement

Dimensions

Width × Depth
60' × 44'
Height
40'
Stories
3

Walls

Framing
Wood 2x6

Roof

Primary pitch
8/12
What you receive

The complete construction drawing set

Sater sells each plan as an electronic PDF set or as AutoCAD files, which also include the PDFs. The PDF is printable but not editable; CAD is the format to choose if your builder or drafter will make changes. Both are delivered by email. Below is what a set contains, per Sater.

  • Cover Sheet, Index and Site Plan
  • Wall Sections and Notes
  • Typical Details and Notes
  • Foundation Layout Plan
  • Detailed Floor Plans
  • Reflected Ceiling Plan
  • Floor Framing Plan (basement, crawl space and upper floors)
  • Roof Layout
  • Exterior Elevations
  • Building Sections and Details
  • Interior Elevations
  • Electrical Plan

Sater draws its plans to be consistent with the International Residential Code in effect when each plan was created, but does not warrant code conformity; changes may be needed for your jurisdiction. Plans are not stamped, so if your building department requires a stamp, a locally licensed engineer will need to review the set. Heating, air conditioning and plumbing layouts are not included.

Purchase this plan on Sater Design Collection →
A PDF purchase conveys a print license; CAD conveys an electronic license that allows your consultants to edit the drawings. Sater mails the license agreement after the files are emailed.
Modify this house plan

Want changes? Sater quotes them.

If Walker Way is close but not quite right, Sater's own design team handles modifications. You request them through Sater's Modification Consultation form; HomePlanHQ does not modify plans.

A written proposal first

Fill out the form and pay a $75 consultation fee. Sater replies with a proposal covering the cost and time for your changes.

Fee credited if you proceed

If you accept the proposal, the $75 is deducted from the modification cost. You then buy the plan and pay the agreed modification price.

Billed hourly

Sater bills modifications by the hour, at a higher rate for work that needs redesign by Dan Sater II. Current rates and timelines are on the form page.

Open Sater's modification form →
Continues to the Modification Consultation page on saterdesign.com.
Plan and images courtesy of Sater Design Collection. Pricing and specifications subject to change at merchant. View the official Sater Design Collection listing for current details. Images copyright Sater Design Collection, Inc., shown with permission.